Best Backing For Embroidery 2023

Tender Touch is a lightweight, permanent stabilizer that is ideal for covering the back of finished computerized embroideries to protect sensitive skin from scratchy stitches. It is available in white or black and can be used with any fabric.

This is a backing for embroidery that stretches with the garment, making it ideal for baby and child garments, sports apparel, lingerie, spandex, and golf shirts.

This backing is made of a stretchy material that will move with the garment as you sew, making it ideal for embroidering stretchy fabrics like sports apparel, lingerie, and spandex golf shirts.

This is a backing for embroidery that is 1.7 inches high, 7.5 inches long, and 4.8 inches wide.

This backing is a type of stabilizer that is used to cover the back of an embroidery design, typically to prevent the stitches from scratching the wearer’s skin. It is applied to the back of the design after the embroidery is complete.

The backing is a roll of white fabric that is 12 inches high and 10 yards long. It is also available in black and in larger rolls of 14.5 inches by 25 yards.

This backing is for embroidery and is made in the USA. It is the highest standard in the industry.

This backing is soft and sheer, making it ideal for baby garments, golf shirts, or tees. It is also perfect for anywhere you want to avoid a scratchy irritant to the skin!

The Cloud Cover Stitch is a backing for embroidery that is stretchy and bonds well with fabric without affecting its drapability.

The backing is soft and smooth, and it is lightweight. It will not change the touch feeling or drape of the fabric.

Iron-On Stabilizers is a type of backing for embroidery that helps to reduce heavy embroidery and scratchy stitches. It can also protect sensitive skin by covering embroidery that may be irritating to the skin.

This backing for embroidery is made to be soft and comfortable for the skin, while still being sturdy enough to hold up to repeated wear. It is ideal for use on clothing that will see a lot of movement, such as activewear or children’s clothes.

The backing is a fusible stabilizer that is cut one half inch larger than the embroidery design. The rough side is placed against the garment and the smooth side is pressed with an iron set at 250-270°F for 10-15 seconds.

The backing for embroidery is a white roll of stabilizers. It is important to the shopper that they are able to contact the store with any problems.

This backing is a lightweight, permanent stabilizer that is ideal to “cover-the-back” of finished computerized embroideries to protect sensitive skin from scratchy stitches.

This backing is a stretchy material that is ideal for embroidering on garments that will be stretched or moved a lot, like baby and child clothes, sports apparel, lingerie, and spandex shirts.

This is a stretchy backing for embroidery that is often used on sports apparel, lingerie, and spandex golf shirts. It is applied to the back of the garment so that it can stretch with the fabric and not cause any damage to the stitches.

This backing for embroidery is from the United States.

This backing for embroidery is a temporary stabilizer that is best used on firmly woven fabrics and fabrics made from natural fibers. It can be torn away easily yet provides adequate stability.

This is a backing for embroidery that can be used on natural fibers and thicker fabrics. It is great for hoop embroidery, applique, thread stretching, computerized lace embroidery and decorative stitch sewing.

This is a backing for embroidery that is made from 100% first-class Polyester. It is acid and lead free, and will not cause any itching or other problems even when used on skin-touch clothes.

This is a backing for embroidery that can be cut to fit most hoops. It is 10″ wide and can be cut into 8″x10″ to fit a 4×4 hoop, 10″x12″ to fit a 5×7 hoop, or smaller sizes to fit a 1 1/2×2 Oval Pocket Hoop.

This backing is a medium weight 1.8 oz (50 grams) tear away embroidery stabilizer for light to medium stitch density. You can use more than one layer for much denser designs.

This backing is a self-adhesive tear away embroidery stabilizer which is very ideal to use on fabrics that can’t be hooped or too small to fit in a hoop.

This backing is made to keep needles from getting gummed up. It is recommended to slow down the stitch speed to 400spm, use Sewer Aid as a lubricant, and use the special Organ Anti-glue needle. It is also recommended to clean the needle with alcohol and follow the correct steps to use sticky embroidery stabilizer.

The backing is a sticky tearaway embroidery stabilizer that can be used for hard to hoop items like bulky towels, cuffs, collars, socks, doll clothes, edges, cap, backpacks, napkin corners, pockets, etc.

This is a backing for embroidery that is medium weight and can be used for light to medium stitch density. It is 1.8 oz (50 grams) and can be torn away. It is also a stabilizer for embroidery that can be used to support additional stitches.

The backing is made of 100% first-class polyester, which is acid and lead free. It is skin-friendly and will not cause any itching even if it comes into contact with skin.

This is a high quality, medium weight backing for embroidery that is 1.8 ounces.

This backing is for a shopper who wants to embroider a design onto a 4×4 hoop.

This backing is for embroidery and it consists of 100 8″x8″ precut sheets.

The backing is made of a thin, flexible material that can be easily torn in either direction.

This backing is a fusible iron on tear away embroidery stabilizer. You iron it on the shiny side (glue coating) to the wrong side of your project. It eliminates annoying shifting, sliding and puckering of material and totally stabilizes any fabric in seconds with no time-consuming pinning.

This backing is used for embroidery on a shopper. It is a fusible iron on tearaway stabilizer that can be used for all types of applique, digitized and free-motion embroidery, edge stitching support, monogramming, buttonholes, and decorative stitching.

This backing for embroidery is made to be ironed at a lower temperature to avoid damaging the shopper’s clothing.

The backing is a fusible iron on tear away embroidery stabilizer that is 12″ wide and can be cut to fit most hoops for home-based and commercial embroidery machines.

This is a type of backing that can be used for embroidery on a shopper. It is a medium weight 1.8 oz (50 Grams) fusible iron on tear away embroidery stabilizer for light to medium stitch density.

This backing is designed to be used with embroidery projects. It is made from a high quality material that is designed to be easy to remove from the project once it is completed.

This backing is for embroidery and it is easy to use and tears clean in either direction.

This backing is a heavy weight, 3.0 oz white backing. It is used for embroidery and is a shopper.

This is a roll of backing that is 4 inches wide and 100 yards long. It is used for embroidery projects.

This is a backing for embroidery that works well with all multi-needle machines that use a hoop.

Backing for embroidery that is semitransparent, soft, and sheer.

This backing is best used on light colored fabrics because it eliminates show-through. It is perfect for chest logos, pique knits, Polo shirts, T Shirts, infant items, micro fiber apparel, silk and satin.

This backing is used for embroidery on a shopper. It is a light weight no show mesh stabilizer that can be used on its own or with another layer for added stability.

This backing is a light weight tearaway stabilizer that can be used underneath of no show mesh stabilizer for extra stability.

This is a backing for embroidery that is made of 100% embossed nylon which is acid free and lead-free. It is safe and extremely soft to use on your skin-touch clothes. The unique design of embossing can add multi-directional stability for your design.